Aero-Sharp inverters

Unfortunately, like many cheap Inverter manufacturers, Aero-Sharp are no longer trading. This means your Aero-Sharp inverter will not be covered under any manufacturer warranty.

If you have a faulty Aero-sharp you are going to need to a solar accredited electrician to come and check out your system to see if it’s an internal fault with the solar inverter or some other solar related issue.

The fault may not be the Inverter. Driftwind Electrical have, CEC accredited Solar Installers who can come to your home or business to perform a Solar Health check. For your peace of mind and accurately diagnose your problem. Very often we find problems that could have cost our client thousands of dollars very soon. However due to early diagnosis we fixed the issue early at a fraction of what could have been the eventual cost. Would you drive your new car for 5 or 10 years without getting it serviced?
 
We do have inverters similar in electrical characteristics to Aero-Sharp (transformer inverters) to replace your failed unit if necessary.

aero-sharp inverter manual

COMMON AEROSHARP ERRORS

FAULT CODE	DESCRIPTION	REMEDY
BIT Failure	Internal component has failed	The inverter needs to be replaced.
Ground Fault	This could indicate an earth fault or, if permanent, the board may have fused.	We recommend you book a maintenance service to have a technician check for an earth leak. If none is detected, the inverter will need to be replaced.
PV1 Over Volt	Internal component has failed	The inverter needs to be replaced.
PV2 Over Volt	Internal component has failed	The inverter needs to be replaced.
System Error	Internal component has failed	The inverter needs to be replaced.
Grid Volt Error	An AC fuse may have blown or the AC board may be fused.	We recommend you book a maintenance service to have a technician check the AC fuse in the inverter and the AC board. The inverter may need replacing.
PV Over power	Internal component has failed	The inverter needs to be replaced.
Grid Freq Error	This fault may indicate an energy provider issue or the AC board may have fused.	If the fault is intermittent, this could be a legitimate power distributor issue. If it is permanent, the inverter will need replacing.
TVS1 Failure	Internal component has failed	The inverter needs to be replaced.
TVS2 Failure	Internal component has failed	The inverter needs to be replaced.
Inverter dead	Internal component has failed	If all the isolators are in the "on" position, then the inverter needs to be replaced.

Help with you Aero-Sharp Inverter?

If you are still unsure call us to see if we can help you over the phone, or book in a Solar Health Check.
You could save big $$$’s with one of our Solar accredited teams expert appraisal. 

If you believe that your Inverter may be subject to an Insurance claim please contact us on 07 3274 4365 and advise us of the details.